DJI Matrice 3TD Drone

Built For DJI Dock 2

The more capable yet noticeably smaller DJI Dock 2 deploys both the DJI Matrice 3D or 3TD drones with ease and security. Dock 2 is lightweight, offers high-level operation capabilities, and has cloud-based intelligent functions that bring efficiency and quality to automatic operations.

Small & Lightweight Design

DJI Matrice 3TD is 1.41kg (including the weight of the flight battery). The dimensions are 335×398×153 mm (L×W×H, without propellers).

Compatible With The DJI RC Pro Enterprise Controller

The DJI Matrice 3TD can be manually operated using the DJI RC Pro Enterprise Controller (same controller used with the DJI Mavic 3 Enterprise Series)/

Rugged, Reliable, Recharged

IP54 Dustproof and Waterproof

DJI Matrice 3TD can be operated in harsh climates and environments.

High-Performance Aircraft

The all-new DJI Matrice 3D/3TD is specifically designed for DJI Dock 2. The DJI Matrice 3TD outfitted with a wide-angle camera, a telecamera, and an infrared camera, can depict both visible light and thermal images, making it suitable for security and inspection operations.

Superior, Comprehensive Performance

Thanks to its powerful operation capabilities, DJI Matrice 3D/3TD meets the requirements of
high-standard operations.

DJI Matrice 3D and DJI Matrice 3TD Specs:

• IP54 Dust and Waterproof [1]

• 50 Minutes Max Flight Time [8]

• 7km Max Effective Operating Radius [2]

• 6-Directional Obstacle Sensing System

• Integrated RTK Module +/- 3cm Positioning Accuracy

• 400 Battery Cycles [10]

Steady Operation, Uncompromised Efficiency

Quick Takeoff

DJI Dock 2 integrates dual RTK antennas, allowing the aircraft to obtain accurate RTH location information without waiting for the RTK data to converge. It also performs a complete propeller inspection and takeoff in as short a time as 45 seconds, quickly entering operational status. [11]

Quick Charging

DJI Dock 2 charges the aircraft from 20% to 90% in just 32 minutes [12] for efficient powering for consecutive operations.

The DJI Matrice 3TD can be charged using the DJI Matrice 3D Series Charging Kit (sold separately).

Cloud-Based Operation, Maximum Control

Cloud Mapping

After the aircraft completes its flight task, DJI FlightHub 2 generates high-precision 3D models based on the collected flight data, authentically restoring the operating environment. These models can be annotated, measured, and downloaded.

Flight Route Editor

Utilizing high-precision 3D models, operators can conduct visual flight route editing from a first-person perspective and preview simulated imaging results. This facilitates intuitive and efficient operations and enhances flight route planning and accuracy.

AI Spot-Check

Frame a specific area in the 3D model, and the aircraft will automatically compare the area to be captured with the framed area in subsequent automated operations. This actively adjusts the camera's angle to ensure accurate capture of the same area across multiple flights.

FlyTo Tasks

DJI FlightHub 2's FlyTo tasks utilize high-precision 3D models to automatically plan the optimal flight route. Before an urgent task, the operator only needs to click on the subject, and the aircraft will fly to the destination via an efficient and safe route.

Live Flight Controls

Based on DJI FlightHub 2 or a third-party cloud platform, even if DJI Dock 2 is deployed in a remote region, the operator can still control the flight and gimbal angle via keyboard and mouse.

Obstacle Bypass

When performing automatic flight tasks, the aircraft utilizes omnidirectional obstacle sensing and automatic obstacle bypass functions to enhance the success rate of flight tasks.

Open Ecosystem Extensive Capabilities

Third-Party Payloads

Add even more functionality, connect to third-party payloads [3] such as loudspeakers and spotlights via the aircraft's E-Port, and remotely control added payload via DJI FlightHub 2. [13] Additionally, the aircraft's E-Port Lite supports connection to a parachute [3] for increased flight and personnel safety.

Cloud-to-Cloud Coordination

Through DJI FlightHub 2's FlightHub Sync function, users can easily link it to a third-party cloud platform for flexible management of operation data.

* Always check and strictly abide by local laws and regulations before flying.

** All data on this page was collected using a production model DJI Dock 2 and DJI Matrice 3D/3TD in a controlled environment. Actual results may vary depending on the environment, usage, and firmware version.

*** All videos and images on this page were shot in strict compliance with relevant local laws and regulations.

**** DJI Matrice 3D/3TD must be activated via the DJI Pilot 2 app before use.

***** To ensure that the equipment operates steadily and continuously, please perform regular maintenance. For details, refer to the Maintenance Manual.

1.DJI Dock 2 is IP55 rated, and DJI Matrice 3D/3TD is IP54 rated. Both are tested under controlled laboratory conditions. The IP rating is not permanently effective and may decrease due to product wear and tear. For details, refer to the User Manual.

2.Measured in an environment of approximately 25°C (77°F) with a reserve battery level of 25%, ambient wind speed of approximately 4 m/s, round-trip flight speed of approximately 15 m/s, and hovering operation of 10 minutes. This value is for reference only, and the actual operation data may vary.

3. Sold separately.

4.DJI Matrice 3D/3TD or the DJI Mavic 3 Enterprise Series aircraft can be used.

5.When the aircraft has sufficient battery level, the following operations can be completed in 12 minutes: Turn on the DJI Matrice 3D Series drone and connect it to the DJI RC Pro Enterprise. Enter DJI Pilot 2, select the Dock Site Evaluation function, and then finish the site evaluation step by step according to the instructions until the evaluation results are obtained. ‌This value is for reference only, and the actual experience may vary.

6.Measured with a fully charged backup battery in a 25°C (77°F) environment. After a power outage, the dock does not support functions like aircraft charging, air conditioning, dock cover heating, and wind speed gauge heating. Always check malfunctions promptly.

7.Measured in a windless, sand-free, and non-erosive environment at 25°C (77°F). Actual maintenance intervals should be determined based on the deployment environment and operating frequency. It is recommended to conduct maintenance every six months or sooner.

8.Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 46.8 kph in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.

9.The aircraft has a 10° blind spot in the upper rear area. Always fly with caution.

10.Within 12 months, when the ambient temperature for battery storage is below 35°C (95°F), and the cumulative time with a battery level of 90% or higher is less than 120 days, the battery cycles can reach 400 times.

11.In an environment with good network signals, it takes approximately 45 seconds, the fastest from when the operator clicks Take Off in DJI FlightHub 2 to when the aircraft leaves the landing pad. This value is for reference only, and the actual experience may vary.

12.Measured in a 25°C (77°F) environment while charging.

13.Please consult your dealer first to ensure that the payload is compatible with DJI FlightHub 2.